£ - Pounds Sterling (UK)
Shop By

Currently Shopping by:

  1. Remove This Item Price: £100.00 - £199.99
Category
  1. Hot Water (6)
  2. Space Heating (5)
  3. Accessories (2)
Best Seller
Excl. Tax: £7.95 Incl. Tax: £9.54
Excl. Tax: £19.99 Incl. Tax: £23.99
Compare products

You have no items to compare.

Heating

per page

Items 1 to 10 of 13 total

Page:
  1. 1
  2. 2
  1. Excl. Tax: £125.00 Incl. Tax: £150.00
    Hyco Sun Prince Infra Red heaters utilise quartz halogen lamps that operate at a very high temperature, converting almost all the electrical energy into short wavelength infra red radiation. They are therefore ideal for heating applications in draughty or tall buildings such as garages, warehouses, factories and similar difficult - to - heat situations where convection heating would be impractical. Sunprince lamps last an average of 7000 hours and are made from high temperature resistant quartz glass that must not be handled with bare hands. Features • Instantaneous cost effective heating • Stylish and robust construction • Allows heating of targeted areas • Silent operation & instant switch on/off • Chrome plated safety guard • Grey powder coated steel chassis • High quality gold & ruby lamps - see table below • Wall mounted - bracket included • Warranty excludes lamps • Not suitable for outdoor use • An RCD circuit breaker suitable for a high in rush current is required. Optional soft start controllers are available. Techincal Data • SP2000H • Sun Prince 2000 • 2.0kW • 474 x 198 x 141 • Standard Lamps Gold 1 x L2000CG Heater dimensions exclude fixing bracket. Including bracket increases depth from 141 to 360mm.
  2. Excl. Tax: £115.00 Incl. Tax: £138.00
    Hyco Sun Prince Infra Red heaters utilise quartz halogen lamps that operate at a very high temperature, converting almost all the electrical energy into short wavelength infra red radiation. They are therefore ideal for heating applications in draughty or tall buildings such as garages, warehouses, factories and similar difficult - to - heat situations where convection heating would be impractical. Sunprince lamps last an average of 7000 hours and are made from high temperature resistant quartz glass that must not be handled with bare hands. Features • Instantaneous cost effective heating • Stylish and robust construction • Allows heating of targeted areas • Silent operation & instant switch on/off • Chrome plated safety guard • Grey powder coated steel chassis • High quality gold & ruby lamps - see table below • Wall mounted - bracket included • Warranty excludes lamps • Not suitable for outdoor use • An RCD circuit breaker suitable for a high in rush current is required. Optional soft start controllers are available. Techincal Data • SP1500H • Sun Prince 1500 • 1.5kW • 474 x 198 x 141 • Standard Lamps Ruby 1 x L1500C
  3. Excl. Tax: £122.00 Incl. Tax: £146.40
    Accona Panel Heater 2.0kW Timer (AN2000T) The new Accona panel heaters are ideal for a wide range of fixed installation heating applications in the home and office environment. Finished in ivory white the new stylish heaters are available in 1.5kW and 2kW in either a standard or timer model. Features: Standard model • Mechanical thermostat • Power on/off switch Timer Model • 7 Day LCD electronic timer • Choose from pre-set schedules for timer operation or create your own • Electronic temperature control – 2 user set temperature settings: Peak for a comfortable setting whilst the room is occupied Off peak (typically night or frost protection) ensures the temperature does not fall below a chosen temperature • Time delayed start up and shut down • Integrated child lock Technical Data • AN2000T • Accona Panel Heater 2.0kW Timer • 440 x 855 x 98
  4. Excl. Tax: £104.00 Incl. Tax: £124.80
    Accona Panel Heater 2.0kW Standard (AN2000) The new Accona panel heaters are ideal for a wide range of fixed installation heating applications in the home and office environment. Finished in ivory white the new stylish heaters are available in 1.5kW and 2kW in either a standard or timer model. Features: Standard model • Mechanical thermostat • Power on/off switch Timer Model • 7 Day LCD electronic timer • Choose from pre-set schedules for timer operation or create your own • Electronic temperature control – 2 user set temperature settings: Peak for a comfortable setting whilst the room is occupied Off peak (typically night or frost protection) ensures the temperature does not fall below a chosen temperature • Time delayed start up and shut down • Integrated child lock Technical Data • AN2000 • Accona Panel Heater 2.0kW Standard • 440 x 855 x 98
  5. Excl. Tax: £104.00 Incl. Tax: £124.80
    Unvented undersink water heaters are the option of choice for small commercial applications since they offer high performance, mutiple sink capability and allow the use of regualr taps. The Speedflow is ideal for use in cloakrooms and kitchens in offices, shops, student accomodation and domestic premises which have been extended and there is no central hot water near by. In these situations one unit located under the kithcen sink is often used to supply hot water for light dishwashing in the kitchen sink and handwashing in the cloakroom basin. The Speedflow features: • Mains pressure (unvented) unit - choice of 5,10 or 15L capacities • 2kW element as standard, 1.2kW element available for the 10 or 15L models for restricted load applications • External temperature control and Neon element-on indicator • IPX4 rated • Porcelain enamel-lined vessel with magnesium anode • Manually re-settable termal cut-out • Wall mounting or floor standing option • Pressure relief valve included - must be fitted in every case • Maximum working temperature 75 degrees Centigrade • Cable pre-wired (1.5m) - saves time on installation • Units can be sited above or below or below the sink but must be installed the right way up • Optional thermostatic mixing valve available Technical Data • SF05K • Speedflow 5L • 5 Litre • 2.0 kW • 320 x 280 x 245 • Wegith Empty 5.5kg • Weight Full 10.5kg • Heat up 12 mins • Standard heat loss (kWh/24hr) 0.51 Description Connections (hot and cold) - 1/2" BSP colour coded (100mm apart centre to centre) Fittings required (not supplied) - 2 x 1/2" male BSP to 15mm adapter for connection to pressure relief valve 2 x 1/2" female BSP to 15mm adapter for connection unit Supplied power cable length - 1.5m Expansion vessel charge - 3.5 bar Pressure relief valve setting - 6 bar Element - Stainless steel flange type (requires 6mm Allen Key) Thermal cut-out - Manual reset at 85°C Thermostat - Adjustable up to 75°C, E Setting approx. 50°C Anode - Replaceable grey magnesium anode (inspect annually)
  6. Excl. Tax: £110.00 Incl. Tax: £132.00
    Unvented undersink water heaters are the option of choice for small commercial applications since they offer high performance, mutiple sink capability and allow the use of regualr taps. The Speedflow is ideal for use in cloakrooms and kitchens in offices, shops, student accomodation and domestic premises which have been extended and there is no central hot water near by. In these situations one unit located under the kithcen sink is often used to supply hot water for light dishwashing in the kitchen sink and handwashing in the cloakroom basin. The Speedflow features: • Mains pressure (unvented) unit - choice of 5,10 or 15L capacities • 2kW element as standard, 1.2kW element available for the 10 or 15L models for restricted load applications • External temperature control and Neon element-on indicator • IPX4 rated • Porcelain enamel-lined vessel with magnesium anode • Manually re-settable termal cut-out • Wall mounting or floor standing option • Pressure relief valve included - must be fitted in every case • Maximum working temperature 75 degrees Centigrade • Cable pre-wired (1.5m) - saves time on installation • Units can be sited above or below or below the sink but must be installed the right way up • Optional thermostatic mixing valve available Technical Data • SF10K • Speedflow 10L • 10 Litre • 2.0 kW • 410 x 310 x 280 • Wegith Empty 6.8kg • Weight Full 16.8kg • Heat up 23 mins • Standard heat loss (kWh/24hr) 0.63 Description Connections (hot and cold) - 1/2" BSP colour coded (100mm apart centre to centre) Fittings required (not supplied) - 2 x 1/2" male BSP to 15mm adapter for connection to pressure relief valve 2 x 1/2" female BSP to 15mm adapter for connection unit Supplied power cable length - 1.5m Expansion vessel charge - 3.5 bar Pressure relief valve setting - 6 bar Element - Stainless steel flange type (requires 6mm Allen Key) Thermal cut-out - Manual reset at 85°C Thermostat - Adjustable up to 75°C, E Setting approx. 50°C Anode - Replaceable grey magnesium anode (inspect annually)
  7. Excl. Tax: £116.00 Incl. Tax: £139.20
    Unvented undersink water heaters are the option of choice for small commercial applications since they offer high performance, mutiple sink capability and allow the use of regualr taps. The Speedflow is ideal for use in cloakrooms and kitchens in offices, shops, student accomodation and domestic premises which have been extended and there is no central hot water near by. In these situations one unit located under the kithcen sink is often used to supply hot water for light dishwashing in the kitchen sink and handwashing in the cloakroom basin. The Speedflow features: • Mains pressure (unvented) unit - choice of 5,10 or 15L capacities • 2kW element as standard, 1.2kW element available for the 10 or 15L models for restricted load applications • External temperature control and Neon element-on indicator • IPX4 rated • Porcelain enamel-lined vessel with magnesium anode • Manually re-settable termal cut-out • Wall mounting or floor standing option • Pressure relief valve included - must be fitted in every case • Maximum working temperature 75 degrees Centigrade • Cable pre-wired (1.5m) - saves time on installation • Units can be sited above or below or below the sink but must be installed the right way up • Optional thermostatic mixing valve available Technical Data • SF10K12 • Speedflow 10L • 10 Litre • 1.2 kW • 410 x 310 x 280 • Wegith Empty 6.8kg • Weight Full 16.8kg • Heat up 38 mins • Standard heat loss (kWh/24hr) 0.63 Description Connections (hot and cold) - 1/2" BSP colour coded (100mm apart centre to centre) Fittings required (not supplied) - 2 x 1/2" male BSP to 15mm adapter for connection to pressure relief valve 2 x 1/2" female BSP to 15mm adapter for connection unit Supplied power cable length - 1.5m Expansion vessel charge - 3.5 bar Pressure relief valve setting - 6 bar Element - Stainless steel flange type (requires 6mm Allen Key) Thermal cut-out - Manual reset at 85°C Thermostat - Adjustable up to 75°C, E Setting approx. 50°C
  8. Excl. Tax: £114.00 Incl. Tax: £136.80

    Manufacturer: Hyco

    Part Code: HF05VC

    Handyflow Undersink

    Handyflow UndersinkCatalogue Handyflow UndersinkInstruction Manual

  9. Excl. Tax: £127.00 Incl. Tax: £152.40
    Unvented undersink water heaters are the option of choice for small commercial applications since they offer high performance, mutiple sink capability and allow the use of regualr taps. The Speedflow is ideal for use in cloakrooms and kitchens in offices, shops, student accomodation and domestic premises which have been extended and there is no central hot water near by. In these situations one unit located under the kithcen sink is often used to supply hot water for light dishwashing in the kitchen sink and handwashing in the cloakroom basin. The Speedflow features: • Mains pressure (unvented) unit - choice of 5,10 or 15L capacities • 2kW element as standard, 1.2kW element available for the 10 or 15L models for restricted load applications • External temperature control and Neon element-on indicator • IPX4 rated • Porcelain enamel-lined vessel with magnesium anode • Manually re-settable termal cut-out • Wall mounting or floor standing option • Pressure relief valve included - must be fitted in every case • Maximum working temperature 75 degrees Centigrade • Cable pre-wired (1.5m) - saves time on installation • Units can be sited above or below or below the sink but must be installed the right way up • Optional thermostatic mixing valve available Technical Data • SF15K12 • Speedflow 15L • 15 Litre • 1.2kW • 530 x 310 x 280 • Wegith Empty 8.3kg • Weight Full 23.3kg • Heat up 57 mins • Standard heat loss (kWh/24hr) 0.71 Description Connections (hot and cold) - 1/2" BSP colour coded (100mm apart centre to centre) Fittings required (not supplied) - 2 x 1/2" male BSP to 15mm adapter for connection to pressure relief valve 2 x 1/2" female BSP to 15mm adapter for connection unit Supplied power cable length - 1.5m Expansion vessel charge - 3.5 bar Pressure relief valve setting - 6 bar Element - Stainless steel flange type (requires 6mm Allen Key) Thermal cut-out - Manual reset at 85°C Thermostat - Adjustable up to 75°C, E Setting approx. 50°C Anode - Replaceable grey magnesium anode (inspect annually)
  10. Excl. Tax: £121.00 Incl. Tax: £145.20
    Unvented undersink water heaters are the option of choice for small commercial applications since they offer high performance, mutiple sink capability and allow the use of regualr taps. The Speedflow is ideal for use in cloakrooms and kitchens in offices, shops, student accomodation and domestic premises which have been extended and there is no central hot water near by. In these situations one unit located under the kithcen sink is often used to supply hot water for light dishwashing in the kitchen sink and handwashing in the cloakroom basin. The Speedflow features: • Mains pressure (unvented) unit - choice of 5,10 or 15L capacities • 2kW element as standard, 1.2kW element available for the 10 or 15L models for restricted load applications • External temperature control and Neon element-on indicator • IPX4 rated • Porcelain enamel-lined vessel with magnesium anode • Manually re-settable termal cut-out • Wall mounting or floor standing option • Pressure relief valve included - must be fitted in every case • Maximum working temperature 75 degrees Centigrade • Cable pre-wired (1.5m) - saves time on installation • Units can be sited above or below or below the sink but must be installed the right way up • Optional thermostatic mixing valve available Technical Data • SF15K • Speedflow 15L • 15 Litre • 2.0 kW • 530 x 310 x 280 • Wegith Empty 8.3kg • Weight Full 23.3kg • Heat up 35 mins • Standard heat loss (kWh/24hr) 0.71 Description Connections (hot and cold) - 1/2" BSP colour coded (100mm apart centre to centre) Fittings required (not supplied) - 2 x 1/2" male BSP to 15mm adapter for connection to pressure relief valve 2 x 1/2" female BSP to 15mm adapter for connection unit Supplied power cable length - 1.5m Expansion vessel charge - 3.5 bar Pressure relief valve setting - 6 bar Element - Stainless steel flange type (requires 6mm Allen Key) Thermal cut-out - Manual reset at 85°C Thermostat - Adjustable up to 75°C, E Setting approx. 50°C Anode - Replaceable grey magnesium anode (inspect annually)

per page

Items 1 to 10 of 13 total

Page:
  1. 1
  2. 2

8