Vented Point of Use
Ideal for occasional use light dishwashing at a single kitchen sink in the workplace, for example portable buildings, offices, shops, workshops, garages and other small commercial premises.
Easy clean, high impact plastic
Incoloy sheathed coil
Bulb type adjustable to approx. 80⁰C
E setting approx. 55⁰C
High density polystyrene CFC free
Open outlet non pressurised system, Vented mixer tap must be used.
Safety re-settable thermal cut out Frost protection setting when power is switched on.
It is normal for the vented tap on this type of unit to drip slightly during the heating cycle, caused by the water expanding as it heats up.
Must be sited below a sink, with the inlet and outlet connections at the top of the unit.
Must be installed by a suitably qualified person.
Can be connected to a rising main or to a cistern with a minimum working head of 5 metres.
Fittings provided to connect to 15mm copper pipe.
The vented mixer tap provided must be used.
ONLY USE THE OUTLET FITTINGS SUPPLIED SO THAT THE UNIT IS NOT PRESSURISED.
Installation must comply with current IEE regulations.
To be wired to a double pole switched fused spur with a minimum break capacity of 13 amps.
Cable pre-wired (1m)
1 year parts or replacement warranty
|Product Code||Capacity (litres)||Power (kw)||Heat Up Time (mins) *||Standing Loss (kWh/day)|
* Heat up time from 10°C to 75°C
|Product Code||Height (mm)||Width (mm)||Depth (mm)||Weight (kg) Empty||Weight (kg) Full|
Spare parts are available through our stockists.
A list of spare parts available for our current range is shown below.
For further help or advice please contact our customer services team on 01924 225 200 - we can usually help, for example, help diagnosing which part you need, help if you require spare parts for obsolete models or if you need fast delivery.
|Prodcut Code||Description||Spare Parts for Product Code|
|HF05LQ_ELEMENT||Handyflow 2.0 kW element||HF05MVC|
|HF05LQCUT-OUT||Handyflow thermal cut-out||HF05MVC|
|HFDIALQ||Handlyflow thermostat control knob||HF05MVC|
|HF05BRKTQ||Handyflow mounting bracket||HF05MVC|
|HFFLEX A||Handyflow undersink single hose A||HF05MVC|
|HFFLEX B||Handyflow undersink single hose B||HF05MVC|
|HFFLEX C||Handyflow undersink single hose C||HF05MVC|
|HFFLEXSET||Handyflow undersink set of flex hoses (A, B and C)||HF05MVC|