Description
Hyco Handyflow Oversink
Vented Point of Use
5 litres
Usage:
Ideal for occasional use light dishwashing at a single kitchen sink in the workplace, for example portable buildings, offices, shops, workshops, garages and other small commercial premises.
Features
-
- Open outlet heater to supply hot water to a single sink
-
- Ideal when economy and ease of installation are the key priorities
-
- Stylish design and slimline profile – depth only 7” (180mm)
-
- Comes complete with tap and chrome spout
-
- Thermal cut-out can be re-set rather than requiring to be replaced
-
- 2.0 kW element
-
- External temperature control with frost protection setting
-
- Neon element on indicator
-
- Wall fixing bracket included and cable pre-wired (1m) – saves time on installation
-
- No need for expansion vessel, relief valve or reducing valve
Technical Specification
Outer Casing
Easy clean, high impact plastic
Heating Element
Incoloy sheathed coil
Thermostat
Bulb type adjustable to approx. 80⁰C
E setting approx. 55⁰C
Water Tank
Polypropylene
Insulation
High density polystyrene CFC free
Spout
Length 10” (250mm)
Safety
Open outlet non pressurised system, supplied tap and spout must be used.
Safety re-settable thermal cut out Frost protection setting when power is switched on.
Heating Cycle
It is normal for the spout on this type of unit to drip slightly during the heating cycle, caused by the water expanding as it heats up.
IP Rating
IP24
Approvals
CE
Installation
Must be sited above a sink using the wall fixing bracket supplied, with the spout and tap located at the bottom of the unit.
Plumbing
Must be installed by a suitably qualified person.
Can be connected to a rising main or to a cistern with a minimum working head of 5 metres.
Connections ½” BSP to cold side
The spout and inlet tap provided must be used.
ONLY USE THE OUTLET FITTINGS SUPPLIED SO THAT THE UNIT IS NOT PRESSURISED.
Electrical Connection
Installation must comply with current IEE regulations.
To be wired to a double pole switched fused spur with a minimum break capacity of 13 amps.
Cable pre-wired (1m)
Standard Warranty
1 year parts or replacement warranty
Data Tables
Product Code | Capacity (litres) | Power (kW) | Heat Up TIme (mins) * | Standing Loss (kWh/day) |
---|---|---|---|---|
HF05LM | 5 | 2.0 | 12 | 0.32 |
* Heat up time from 10°C to 75°C
Product Code | Height (mm) | Width (mm) | Depth (mm) | Weight (kg) Empty | Weight (kg) Full |
---|---|---|---|---|---|
HF05LM | 400 | 270 | 180 | 3.5 | 8.2 |
Spares
Spare parts are available through our stockists.
A list of spare parts available for our current range is shown below.
For further help or advice please contact our customer services team on 01924 225 200 – we can usually help, for example, help diagnosing which part you need, help if you require spare parts for obsolete models or if you need fast delivery.
Product Code | Description | Spare Parts for Product Code |
---|---|---|
HF05LQ_ELEMENT | Handyflow 2.0 kW element | HF05LM |
HF05LQCUT_OUT | Handyflow thermal cut-out | HF05LM |
HF05LQTHERMO | Handyflow thermostat | HF05LM |
HFDIALQ | Handyflow thermostat control knob | HF05LM |
HF05BRKTQ | Handyflow wall mounting bracket | HF05LM |
SPT8CHRQ | Handyflow oversink chrome spout 8” | HF05LM |
HDYTAP | Handyflow oversink tap | HF05LM |
Energy Efficiency
Reviews
There are no reviews yet.