Speedflow 10L 2.0kW SF10K

Unvented undersink water heaters are the option of choice for small commercial applications since they offer high performance, mutiple sink capability and allow the use of regualr taps.

The Speedflow is ideal for use in cloakrooms and kitchens in offices, shops, student accomodation and domestic premises which have been extended and there is no central hot water near by. In these situations one unit located under the kithcen sink is often used to supply hot water for light dishwashing in the kitchen sink and handwashing in the cloakroom basin.

The Speedflow features:
• Mains pressure (unvented) unit – choice of 5,10 or 15L capacities
• 2kW element as standard, 1.2kW element available for the 10 or 15L models for restricted load applications
• External temperature control and Neon element-on indicator
• IPX4 rated
• Porcelain enamel-lined vessel with magnesium anode
• Manually re-settable termal cut-out
• Wall mounting or floor standing option
• Pressure relief valve included – must be fitted in every case
• Maximum working temperature 75 degrees Centigrade
• Cable pre-wired (1.5m) – saves time on installation
• Units can be sited above or below or below the sink but must be installed the right way up
• Optional thermostatic mixing valve available

Technical Data
• SF10K
• Speedflow 10L
• 10 Litre
• 2.0 kW
• 410 x 310 x 280
• Wegith Empty 6.8kg
• Weight Full 16.8kg
• Heat up 23 mins
• Standard heat loss (kWh/24hr) 0.63

Description
Connections (hot and cold) – 1/2″ BSP colour coded (100mm apart centre to centre)
Fittings required (not supplied) – 2 x 1/2″ male BSP to 15mm adapter for connection to pressure relief valve
2 x 1/2″ female BSP to 15mm adapter for connection unit
Supplied power cable length – 1.5m
Expansion vessel charge – 3.5 bar
Pressure relief valve setting – 6 bar
Element – Stainless steel flange type (requires 6mm Allen Key)
Thermal cut-out – Manual reset at 85°C
Thermostat – Adjustable up to 75°C, E Setting approx. 50°C
Anode – Replaceable grey magnesium anode (inspect annually)

SKU: SF10K Categories: , ,

Description

Unvented undersink water heaters are the option of choice for small commercial applications since they offer high performance, mutiple sink capability and allow the use of regualr taps.

The Speedflow is ideal for use in cloakrooms and kitchens in offices, shops, student accomodation and domestic premises which have been extended and there is no central hot water near by. In these situations one unit located under the kithcen sink is often used to supply hot water for light dishwashing in the kitchen sink and handwashing in the cloakroom basin.

The Speedflow features:
• Mains pressure (unvented) unit – choice of 5,10 or 15L capacities
• 2kW element as standard, 1.2kW element available for the 10 or 15L models for restricted load applications
• External temperature control and Neon element-on indicator
• IPX4 rated
• Porcelain enamel-lined vessel with magnesium anode
• Manually re-settable termal cut-out
• Wall mounting or floor standing option
• Pressure relief valve included – must be fitted in every case
• Maximum working temperature 75 degrees Centigrade
• Cable pre-wired (1.5m) – saves time on installation
• Units can be sited above or below or below the sink but must be installed the right way up
• Optional thermostatic mixing valve available

Technical Data
• SF10K
• Speedflow 10L
• 10 Litre
• 2.0 kW
• 410 x 310 x 280
• Wegith Empty 6.8kg
• Weight Full 16.8kg
• Heat up 23 mins
• Standard heat loss (kWh/24hr) 0.63

Description
Connections (hot and cold) – 1/2″ BSP colour coded (100mm apart centre to centre)
Fittings required (not supplied) – 2 x 1/2″ male BSP to 15mm adapter for connection to pressure relief valve
2 x 1/2″ female BSP to 15mm adapter for connection unit
Supplied power cable length – 1.5m
Expansion vessel charge – 3.5 bar
Pressure relief valve setting – 6 bar
Element – Stainless steel flange type (requires 6mm Allen Key)
Thermal cut-out – Manual reset at 85°C
Thermostat – Adjustable up to 75°C, E Setting approx. 50°C
Anode – Replaceable grey magnesium anode (inspect annually)

Reviews

There are no reviews yet.

Be the first to review “Speedflow 10L 2.0kW SF10K”

Your email address will not be published.

Menu